Welcome to Hengshui Jianfeng Engineering Rubber co., LTD.,!

Classification of poly - sulfur waterproof sealant

author: Jianfeng Engineering from: 原创 date: 2017/12/23 9:00:00 hit: 10518 ℃
Tips: Classification of poly - sulfur waterproof sealantPolysulfide sealant waterproof products: A, accord...

Classification of poly - sulfur waterproof sealant

Polysulfide sealant waterproof products: A, according to the classification of liquidity can be divided into non droop type (N) and self leveling (L) type two; B, according to the displacement capacity can be divided into two levels: 25,20; C, according to the tensile modulus can be divided into high modulus and a low modulus (HM) (LM) two a second level of Tianjin province。 Hangu District two-component polysulfide sealant distributor。3, sample test。 Lishui city of Zhejiang Province, a two-component polysulfide sealant before construction。 Self leveling two-component polysulfide sealant waterproof, oil resistance, ageing resistance, UV resistance impact resistance, abrasion resistance, high and low temperature (-50 DEG C -120 C) noPoison, no pollution; low modulus。

The characteristics of self leveling two-component sealant:

1 adhesive: self leveling two-component polysulfide sealant for cement, steel, glass, wood, natural stone material has good adhesion。 The general construction and water conservancy project should use the low modulus and high elongation of polysulfide sealant, the bond strength is more than 0。2Mpa, elongation is greater than or equal to 300%。

2, water resistance: Poly sulfur sealant on the sea water, tap water, distilled water is stable, in contrast to the sea (including salt) the weight of the smallest change.

3, acid and alkali resistance, self leveling two-component polysulfide sealant is not resistant to strong acid and alkali. But the thin inorganic acid, alkali and salt is stable.

4, the heat aging resistance: the thermal aging property of polymer sealant is very good, but it can work for a long time at a temperature of 40 degrees Celsius to 120 degrees Celsius。

5, good radiation resistance: Poly sulfur sealant r_ ray resistance of the performance is very good.

6, non-toxic: Although liquid polysulfide sealant is sulfur smell smell, but after curing were gradually absorbed。 The packing of polysulfide sealant by testing the L China environmental and Sanitary Engineering Research Academy of preventive medicine, D50 >20g / kg。 according to the national standard of toxicity grade is non-toxic level。

7, good air tightness, self leveling two-component polysulfide sealant has good elasticity, and its tightness in elastic sealant is the best. At present after the hot melt butyl rubber adhesive known.

Polysulfide caulk


contact us

TEL: +8613132415777
FAX: 86-318-8538660
Email: eric@bojinsc.com
URL: http://www.bojinsc.com
ADD: Hengshui City, Hebei Province, China

Copyright © 2016 Hengshui Jianfeng Engineering Rubber co., LTD., All Rights Reserved.

北京赛车pk10投注 北京赛车pk10投注 北京赛车pk10投注 北京赛车pk10投注 北京赛车pk10投注 北京赛车pk10投注 北京赛车PK10开奖直播历史记录 pk10开奖结果 北京赛车pk10投注 北京赛车pk10投注