Welcome to Hengshui Jianfeng Engineering Rubber co., LTD.,!

Polymer sealant attention

author: Jianfeng Engineering from: 原创 date: 2017/12/21 9:00:00 hit: 9821 ℃
Tips: Polymer sealant attentionPolysulfide sealant waterproof instructions note: a building must be kept d...

Polymer sealant attention

Polysulfide sealant waterproof instructions note: a building must be kept dry, clean, no oil. Two, before construction should be the first primer coating on the surface, the surface to be dry after the protective tape on both sides of the 10mm gap with the width of 50mm, to prevent the construction of redundant polyurethane sealant the construction surface dirty. Three, to 1 barrels of white box polyurethane sealant (A group) and 1 black bag curing agent (B component) to fully mix, until no color.A:B=100:8-12, before use should do first test. Four, the polyurethane sealant mixing well with a putty knife or squeeze the glue gun to fill joint internal pressureWith more than 10cm wide solid fill putty scraping knife glue. Five, after the protective tape applying adhesive can be removed within 24 hours, to avoid water rain. (dry time less than 24 hours, 7 days before irrigation experiment, 28 days all reached six. Performance) preparation of polyurethane sealant should be good finished within two hours, otherwise they will be caused by the construction difficulty of curing paste slowly, avoid waste.

A two-component polysulfide sealant 1 main technical indexes, appearance: A group was divided into gray and white paste B were divided into black paste 2, solid content: 100% 3, density: 1.6 (g/cm3) 4, the mixed proportion of A:B=100:10 ~ 100:14 (volume ratio) of Tianjin Province, Hangu District double component polysulfide sealant distributor. Environmental science and technology. Yunnan Prefecture of Dehong Province: a two-component polysulfide sealant manufacturers. Wide application range; neutral curing non-toxic and non corrosive. Common name: polysulfide sealant, PS sealant and two-component polysulfide sealant (paste), elastic rubber sealcream

Polysulfide caulking


contact us

TEL: +8613132415777
FAX: 86-318-8538660
Email: eric@bojinsc.com
URL: http://www.bojinsc.com
ADD: Hengshui City, Hebei Province, China

Copyright © 2016 Hengshui Jianfeng Engineering Rubber co., LTD., All Rights Reserved.

pk10开奖结果 北京赛车pk10投注 北京赛车pk10投注 北京赛车pk10投注 北京赛车PK10开奖直播历史记录 北京赛车pk10投注 北京赛车pk10投注 北京赛车pk10投注 北京赛车pk10投注 pk10开奖记录